Self-drilling screw for fixing Fermacell gypsum fibre boards to metal or wooden frames in single, double or triple cladding. Easy to screw. Optimal sinking due to the geometry of the screw head. Fermacell self-drilling screws 3.9 x 30 mm: pack of 1000 pieces.

Read more less

The Fischer ULTRACUT FBS II screw is a concrete screw with a special sawtooth geometry that allows rapid screwing into concrete, without dowels. Ideal for ceiling or floor installations, for fixing railings, protective barriers, brackets or props. For use in concrete, brick, dense natural stone, solid masonry and cellular concrete. No hole cleaning is necessary, this screw is perfect for fixing metal constructions, network supports, machines, guardrails, frame elements, temporary fixings of construction site equipment, etc. The optimization between the drilling diameter and the thread diameter has been studied in such a way that the screw machines its own thread in the concrete. The cutting zone facilitates the penetration of the screw, reduces the screwing effort, and increases the battery life of portable power tools. The control gauge allows you to check the external diameter of the screw threads, and thus guarantee optimum hold of the screw in the context of reusable fasteners. Drilling diameter 10 mm with a minimum depth of 130 mm, screw dimensions 10 x 120 mm. Sold individually.

Read more less

Chemical sealing is an ideal fixing technique in a hollow support such as a concrete block or a dowel does not hold. The technique is easy to use and it is very strong for heavy loads. The principle of chemical sealing is simple: a hole, product mixture, a threaded rod or rebar, screws, etc. Everything hardens and a nut can be screwed onto the threaded rod to fix a heavy element.

Read more less

The Power-Fast FPF-ST A2F in A2 stainless steel is perfect for outdoor wood assemblies such as fences, terraces, pergolas, etc. The unique Power-Fast thread up to the tip of the screw ensures rapid grip. The optimized head geometry allows for a precise, chip-free surface finish without the risk of splitting the wood, even when screwing close to the edge. The self-countersinking head ensures an aesthetic surface finish. The high-performance anti-friction coating reduces friction forces and accelerates screwing. Full thread and TX star drive. Diameter 4.5 mm, length 50 mm, torx TX20 imprint, in box of 200 pieces.

Read more less

Fischer Power-Fast FPF II CTP wood screw box, TX star head screws with partial thread. The countersunk head allows flush screw connections in wood. The partial thread version allows wooden elements to be firmly pressed against each other. The screw is suitable for fastening load-bearing elements in coated wood, hardwood, softwood and for wood connections. The geometry of the Power-Fast II screw allows for fast applications and offers a significantly reduced risk of splitting compared to standard wood screws. The high-performance anti-friction coating of the Power-Fast II screw reduces screwing resistance and allows for effortless installation. The White zinc coating does not contain Chrome VI and is therefore more environmentally friendly. Diameter 4 mm, length 40 mm, Torx TX20 imprint, in box of 200 pieces.

Read more less

FISCHER Power-Fast FPF II CTF screw box, perfect for general wood assemblies, boards, glued laminated timber, skirting boards as well as metal fittings, corners. Countersunk head screws allow you to be flush with the wood. The Fischer chipboard screw is a white zinc-plated screw with a countersunk head, TX20 drive and full thread. The countersunk head with TX drive guarantees high bit stability for flush screw connections. The thread, which extends over the entire length of the screw, ensures optimum force transmission. Diameter 4 mm, length 35 mm, Torx TX20 imprint, in box of 200 pieces.

Read more less

FISCHER Power-Fast FPF II CTF screw box, perfect for general wood assemblies, boards, glued laminated timber, skirting boards as well as metal fittings, corners. Countersunk head screws allow you to be flush with the wood. The Fischer chipboard screw is a white zinc-plated screw with a countersunk head, TX10 drive and full thread. The countersunk head with TX drive guarantees high bit stability for flush screw connections. The thread, which extends over the entire length of the screw, ensures optimum force transmission. Diameter 3 mm, length 16 mm, Torx TX10 imprint, in box of 200 pieces.

Read more less

Box of 50 black zinc-plated steel Torx hinge screws 6 x 50, ideal for fixing and assembling shutter hinges, gates, fences, carpentry, etc. Torx screws (TX30) with a round and wide head allow good adjustment of the assembly .

Read more less

Box of 25 black zinc-plated steel Torx hinge screws 6 x 50, ideal for fixing and assembling shutter hinges, gates, fences, carpentry, etc. Torx screws (TX30) with a round and wide head allow good adjustment of the assembly .

Read more less

Box of 50 black zinc-plated steel Torx hinge screws 6 x 40, ideal for fixing and assembling shutter hinges, gates, fences, carpentry, etc. Torx screws (TX30) with a round and wide head allow good adjustment of the assembly.

Read more less

Box of 25 black zinc-plated steel Torx hinge screws 6 x 40, ideal for fixing and assembling shutter hinges, gates, fences, carpentry, etc. Torx screws (TX30) with a round and wide head allow good adjustment of the assembly.

Read more less

Box of 200 black zinc-plated steel Torx hinge screws 6 x 40, ideal for fixing and assembling shutter hinges, gates, fences, carpentry, etc. Torx screws (TX30) with a round and wide head allow good adjustment of the assembly.

Read more less