Siniat intermediate supports are very popular in renovation. The ring allows for quick and easy adjustment and the rod can be cut to size. Used to stiffen S47 or S45 vertical frame counter-partitions. These supports consist of a screw thread, a fixing base, and an adjustable ring at the top. The intermediate support can be screwed, clipped into a horizontal rail made of an S47 Furring or glued depending on the condition and flatness of the support. This support made of Polypropylene limits thermal bridges. Box of 40 pieces, adjustable from 65 to 210 mm.

Read more less

For the treatment of the joint between Fermacell gypsum fibre boards with straight edges and Fermacell Powerpanel H2O boards with straight edges. Tested and approved by the Eco-Institut in Cologne Easy installation thanks to the special nozzle guarantees the correct dosage and correct location of the adhesive for a very strong joint. Consumption - 1 cartridge = 15m². 310 mL cartridge.

Read more less

The Isover Optima 2 intermediate support is perfect for direct installation on an uneven wall. The support can be screwed or clipped into a horizontal rail made up of a 45 mm S47 Furring. Supports 75 to 160 mm . The Isover intermediate support reduces thermal bridges and has very good mechanical resistance validated by Technical Opinion, rapid and precise adjustment of flatness, adjustable in length by cutting with pliers. Box of 40 p.

Read more less

Self-drilling screw for fixing Fermacell gypsum fibre boards to metal or wooden frames in single, double or triple cladding. Easy to screw. Optimal sinking due to the geometry of the screw head. Fermacell self-drilling screws 3.9 x 30 mm: pack of 1000 pieces.

Read more less

Soudal Soudacryl FF acrylic sealant is a single-component, plasto-elastic, highly malleable, colourfast and waterproof sealant that can be painted after hardening. Excellent adhesion to many porous materials and aluminium, the supports must be clean, degreased and dust-free. Not suitable for natural stone, bitumen, glass and metal. Do not apply if there is a risk of rain or frost during the drying process. White colour.

Read more less

Wilmart 25 mm cutter perfect for cutting plasterboard, very robust stainless steel blade guide, two-material handle, autolock blade adjustment and locking. Deep rack.

Read more less

Komelon 5 meter stainless steel tape measure with stainless steel tape and spring, high resistance and longevity in corrosive (maritime) and humid (stone working) environments. The case is ultra-protected by its co-molded elastomer casing. The Komelon measuring tape specialist is the only manufacturer to design and manufacture all the components of its measures itself: Tape - Spring - Housing - Square - Clip. The assembly is so precise that it gives Komelon measures a noticeable differentiation: - no vibration in rotation - extremely quiet unrolling - smooth rolling The handling is just as exceptional, you immediately feel the comfort of the virgin raw material which provides a particularly soft and smooth touch. Komelon stainless steel tape measure Silver tape with nylon coating and stainless steel spring Large elastomer casing with elastomer studs for impacts. Belt clip. 3 rivet bracket and stainless steel reinforcement. Dimensions: 5 mx 19 mm Tape thickness: 0.130 mm

Read more less

Dhome construction site projector very robust, waterproof equipped with a socket for connecting a portable electrical appliance perfect for DIY or professional use. 30 w, 3200LM Rear socket 16A (220 - 240 V, Max 3000 W) Tiltable lighting up to 90° Ultra light, long cable length (5 m) to move the projector easily. IP54 waterproof rating High impact resistance = IK08 Tilting foot to direct the lighting

Read more less

Taliaplast very robust blue reinforced bucket with lugs, ideal for masonry work, in injected polyethylene guaranteeing resistance to 80 kg. Externally ribbed base for easy grip. 5.3 mm handle (fixed by punching). Wide handle to allow the hand to pass through when emptying the bucket. Handle for greater comfort and to avoid the shearing effect of the hand with the bucket full, with graduation molded into the mass.

Read more less

This reinforced Taliaplast Taliagom bucket has multiple functions thanks to its flat edge: easy handling of materials with a trowel, easy placement against a wall, a ladder, etc. Reinforced with synthetic rubber (EPDM), it is lightweight and very shock-resistant. The flat side allows for many uses, it reduces discomfort and effort when moving (arms remain close to the body) allows you to scrape the floor. 2 holes on each side of the flat edge are provided for adding fixing hooks. Ideal for emptying precisely using an angle as a pouring spout. Comfort handle for a more comfortable grip. Light wire handle Ø 5.3 mm. Reinforced and ribbed base: resistance and comfortable grip. Side stops to keep the handle in a vertical position. This handle is articulated around 2 holes located on the ears of the bucket and remains in a vertical position thanks to 2 side stop lugs located on either side. This position can be easily cancelled by simple pressure. This feature provides real comfort during repeated handling. It prevents inappropriate movements that can, in the long term, cause disadvantageous lower back pain. 13 liters.

Read more less

Taliaplast mixer perfect for mixing high viscosity materials, coatings, glues, plaster, etc.

Read more less

Flat rosette in bichromated steel is an accessory intended for the fixing base of a plumbing pipe. It allows the dowel and the screw tab to be concealed. It can also be used to fix Styrodur or polystyrene plates. External diameter 40 mm, box of 100 pieces.

Read more less